Assignment 4 Saw Horse Project

1. We used a buzzer to plain our seat section of our saw horse and then put it through a level cutter  which made the seat section all leveled and smooth

2. Then cut out sections for legs to slot in and chisel the sections out for the leg slots

3. Got the pieces of timber to make the legs and cut them to make them into legs

4. Got some nails and glue and a compressed air powered drill and drilled some holes for the legs so that the nails had a guide but before nailing the legs to the seat frame we glue the legs then slot them into the slots and then when in the right position we nailed them to the seat frame

5. Started making the cleats for strengthening the seat frame and used more glue and nails to attach the cleats to the seat frame

6.After making the cleats we started making the brace in the center under the seat frame and drilled and nailed them to the cleats and seat frame.

7. Marked out the legs to make them even and flat on ground surface and we cut the legs parallel to the cleats

8. Sanded down to make the saw horse smooth so that there was no rough patches on the saw horse.

Day 11

Today I finished my saw horse and waiting for it to be marked by the tutor also got started on making the wall frame for the sleep out marking out the layout for the wall frame by copying a complete frame that was nearly finished.

Assignment 3 Non Consent Building

In summary, from 23 December 2010, building work that will be added to the current list of exempt work is: 

1. altering, finishing or replacing parts of ceilings

2. penetration must be no greater than 30cm diameter for passages for cables and wires.

3. installation of insulation in existing buildings.

Constructing, installing, replacing, or altering any:

1. any structural support of a sign has to been designed by a professional engineer

2. height restriction of gantry

3. ground level for a carport must not exceed 20 square meters

FloorPlan & Measurements

Floor Plan Measurements:
2/90x45
2/140/45
2/190/45 


Window Measurements:
Window 1 - 2000cmx2200cm
Window 2 - 400cmx1200cm
Window 3 - 1800cmx400cm

Day 10

Today i started on building my saw horse again because i ruined my first saw horse so far on my second saw horse i have completed my legs and ready to nail and glue them to the seat section of the saw horse also learned more about the sleep out plan and the measurements needed for the sleep out layout

Sleepout Layout In Google Sketchup

Day 9

Today we updated our blogs and i have nearly finished my drawing board just got to sand down the edges to make it smooth and router the the edging on my drawing board also we had to research more about the building profile and how to construct a saw horse also we got started on making our saw horse by using a buzzer to make the wood smooth also i looked for my boundary peg yesterday at my house and it was nearby the fence in the backyard